Forum: Third Generation Magna TE - TW

so can anyone tell me if the TL/TW seat rails and the holes to mount them to the floor are the same as the ones in my TF? to simplify can i do a straight swap with no modification? cheers luke

thinking of putting a pod on what parts do i need i see i need a bracket to fit from the maf to the pod someone here must know were and what the part is you need. is it worth it

What are the colour codes for the various model Magna and Verada Springs? Anyone know?

The spreadsheet linked here can be used to calculate how much power a Gen 3 Magna / Verada needs to achieve any given speed and /or go up hills of a given gradient. If you want a bit of amusement, and want to see how much power you would need to reach Bugatti Veyron speeds, type "400" in the...

Hi guys and girls. Great site!!:woot: My first post here ive looked for something similar but could not find. My problem is about two months ago my car overheated and two days later we found alot of coolant on the passenger side floor i did not notice this as no one ever sits there as its just my...

I am going to change the 3 rear plugs in the sons TJ in the coming weeks, and I am wondering what gaskets or parts, other than plugs, I will need to get before hand, if any. Do Mitsubishi supply a kit or are the parts to be used bought separately?....Any other suggestions to make this exercise...

Hi all, just wondering if the popular Kashmir colour in 3rd gens went all the way from TE through to TW with no change? Been trying to colour-code the side strips on a Kashmir TL, paint code HH. Got a spray can made up at AutoBarn today. However, after doing the painting, the side strips...

Ok, a few thoughts would be helpfull here. In idol (only when the fans draw in, not all the time) and under light acceleration, basicaly enough to make the block shudder i am getting a light metallic rattle froming from the drivers side front. I havent narrowed it down to the suspention or the...

I bought a second hand ECU for my TE magna,i believe that the ECU has to be coded to the key? How is this done or does it have to be done at Mitsubishi?

How often does the timing belt needed to be changed or how do I know when I should change it if im looking to buy another magna (VR-X 01)

just wondering if anyone can help what are the best globes to fit parabolic headlights for my TH magna and how much am i looking at spending thanks james

Hey guys just bought some Lovell Super Lows out of a TJ, just wandering if they will fit in my TF? Im presuming they will but just wanted to double check. Cheers.

Hey all - did a quick search first, found a lot of posts about people wanting them and getting them, but no answeres to what i want to know! ok i purchased an external trans cooler the other day for the KL AWD, im still get to get it fitted. been getting conflicting advice as to the...

hey guys, does anyone have a tune from their prosequential ECU in NA form that they could send me? i hope to install mine soon, but tim as warned me about the tune that is supplied. my car is fairly stock atm, just extractors/exhaust and SF manifold. a TH 3.5L engine, manual. running the...

Time to replace shocks (145 000km). Will do job myself. Considering doing springs also. Anyone with experience please comment. The 3 brands under consideration are KYB, Boge and Monroe. Magnas/Veradas have soft standard springing (Verada, according to Autospeed had 140 lb/inch front and 110 lb/inm...

Does anyone remember what spark plug Sprintex recommends for the 3rd Gen blower? I remember reading somewhere it was a 0.6mm gap Iridium spark plug? Am i right or wrong?

Well the misses has finally cracked and said the exhaust on my VRX is too loud, she is too embarrassed to drop my daughter to kindy in the magna as all the other mothers turn around and stare the car down when she pulls into the car park. My daughter also complains on long drives that she gets...

We are having trouble with the clutch fork pressing against the bell housing, and i'm stumped for ideas =/ This is on a 3.5L V6 and this is after the throw out bearing clips into the pressure plate. it's had us stumped all day, so any info would be muchly appreciated

Hay all I ended up going through RPW they had a good price only slightly more expensive then going through quaife themselves but good enough. Got the speedo gear and the LSD unit sent to my door for just on 1600. So yeah im excited but nerverse at the same time. If this one breaks ill literally...